Skyline Skeet and Trap LLC

Guns, Gunsmith &
Skeet fields

Gunsmith:  Ethan Call                                                                2013 Graduate of Colorado School of Trades

 Prices are subject to change without notice.  All guns will get a face to face estimate. 

SERVICE CHARGES                                                                                

Per Man Hour                                        $45                                                                                              
Per Man & Machine Hour                     $60                                   

Written appraisals, cost estimates         $30 (per 4 guns)                                                                   

CLEAN & OIL CUSTOMER GUN

Consisting of completely stripping gun, cleaning all parts, checking for wear, making suggestions to a customer of services needed to put in A-1 condition

                                                          $50 and up , up charges for break opens, excessive dirty guns etc

METAL FINISHING

OXYNATE 7TM REBLUING
Abrasive / bead blast / wire wheel (matte) finish Deluxe Finish:               $95

Same as above followed with #240 and #400 grit polish with all screw holes and corners protected and square

Handgun                                                   $140

Rifle/shotgun Master Finish:                   $135

Same as Deluxe Finish with all polishing marks removed, no ripples, and finished with #555 polish to a mirror finish

Handgun                                                  $175

Rifle/shotgun                                          $160

 

SLOW RUST BLUING / BROWING               $200

PARKERIZING                                                  $100

 

 

 

SIGHT WORK

SIGHT IN CUSTOMER GUN - Does not include cost of ammo, targets, etc. $50

BORE SIGHTING CUSTOMER GUN                                                            $20
PATTERN SHOTGUN
- Does not include cost of ammo, targets, etc.                        $50


                                                                                                                                   

DRILL AND TAP BARREL OR RECEIVER FOR SIGHTS

Per hole                                                                                                                        $20

INSTALL INSERT IN PISTOL SIGHT                                                                 $30

INSTALL FRONT OR MID-RIB BEAD ON SHOTGUN (Plus cost of sight)   $20

INSTALL RECEIVER SIGHTS                                                                           

Gun drilled and tapped                                                                                                $20

SCOPE MOUNTING

Gun drilled and tapped                                                                                               $30

GENERAL BARREL, ACTION & RIFLE WORK

CHECK HEADSPACE                                                                                         $35
MAKE CHAMBER CAST                                                                                   $50
REMOVE STUCK FIRED CASE FROM CHAMBER                                    $45

REMOVE LIVE ROUND FROM CHAMBER                                          Hourly

 REMOVE OBSTRUCTION FROM BORE                                              Hourly

REMOVE FOULING FROM BARREL                                                     Hourly
INSTALL LINER IN BARREL
- Not including cost of liner or bluing       Hourly

CUT AND CROWN BARREL                                                                         

Rifles and Shotguns / Handguns                                                                             $75

TRIGGERS (INSTALLATION OR ADJUSTMENT) Not including cost of trigger. (hourly for some jobs)                                                                                                                        $40

INSTALL MUZZLE BRAKE                                                                             $50

 

SHOTGUN WORK

LONG FORCING CONE                                                              

Non-plated bores, per barrel                                         $40

Plated bores, per barrel                                                 $50

RAISING DENT IN BARREL                          

Not including bluing                                                     $30

POLISH CHAMBER/BORE                                      $35
BACK-BORING (
non plated barrels)                        Hourly                   

OPEN / MODIFY CHOKE                                        $40

PORT BARREL - PER BARREL                            $75

 

STOCK WORK

WOOD FINISHING (Does not include any shaping)

Hunter Finish
Unfilled oil or lacquer finish on average stock                    $90

Same finish but on a complicated stock                               $110

Gunsmith Finish
Filled, rubbed oil finish on average stock                             $135

Same finish but on a complicated stock                                $150

Spray Finish
Lacquer or polyurethane                                                       $95

GLASS BEDDING BARREL & ACTION                     $60

INSTALL RECOIL PAD -                                             Labor only + pad                  
INSTALL ADJUSTABLE BUTT PLATE -                  Labor only

FIT, BED AND FINISH FIBERGLASS STOCK BLANK     $175

PREFINISHED SYNTHETIC STOCK Fit and install barreled action    $60

INSTALL ADJUSTABLE COMB HARDWARE                                    $120

 

 

Welcome

Upcoming Events

Thursday, Jul 12 at 11:00 AM - 6:00 PM
Wednesday, Jul 18 at 11:00 AM - 6:00 PM
Thursday, Jul 19 at 11:00 AM - 6:00 PM
Wednesday, Jul 25 at 11:00 AM - 6:00 PM

Testimonials